Get Started Free
India

Machine monitoring for Indian contract manufacturers, from the first machine

For CNC job shops, injection moulders, forging and press shops, and Tier-2/3 auto-component suppliers in Pune, Chennai, Coimbatore, Rajkot, Ludhiana, Bengaluru and beyond.

An Indian contract manufacturer can track utilisation, cycle counts and early warnings on every machine, old or new, for the price of a clamp-on current sensor and a proximity sensor per machine and an InduQT plan that is free for three machines. No connection to the CNC or moulding machine control is needed. InduQT turns the signals into cutting, idle and stopped hours, shots per hour and cycle-time drift, the numbers OEM customers and audits ask for.

See the sensor guides Ask for free setupAdd InduQT to Claude

Built for

How it works

  1. Pick the question you want answered: running or idle, cycles per hour, compressor load, cooling water.
  2. Buy the sensor from the maker or an Indian distributor; Shelly, ESP32 boards and proximity sensors are widely available.
  3. Publish over MQTT to a Raspberry Pi in the shop, and check the readings with Claude.
  4. Send them to InduQT: Claude creates the machine and the key for you.

Popular starting points in India

CNC utilisation and OEE with a current clamp

about US$60 per machine plus a gateway

Shot counter for injection moulding

about US$50–70 per machine plus a gateway

Induction furnace cooling water

about US$60–90 plus a gateway

Start from your Excel production logs

free to try

Good to know

Customers increasingly ask suppliers for uptime and OEE evidence, and MSME schemes such as ZED certification look at how you measure and improve. Machine data from InduQT gives you the numbers with dates and times behind them. Ministry of MSME

Power cuts and patchy internet: the bridge in our guides stores up to about 5,000 readings while the link is down and sends them when it is back.

Pricing

  • Basic: free, up to 3 machines.
  • Fleet Starter: US$49 a month including 3 machines, US$12 for each extra, unlimited users. A 20-machine shop is about US$253 a month.
  • Billed in US dollars by card; GST where it applies.

InduQT pricing

Free setup with a 12-month plan

Take a 12-month plan and we connect your first machines for you, including Excel production logs or an in-house system you already use.

Ask for free setup

FAQ

Can I see the data on my phone?

Yes. InduQT works in the browser on a phone, and in the Claude app with the InduQT connector you can ask about your machines in plain language.

Do I need a computer engineer?

No. The guides are written for maintenance technicians; an electrician fits the clamp. If you want, we do the setup with an annual plan.