What it checks
- Flame failure and ignition lockouts
- Low-water and level trips
- High-limit and pressure trips
- Combustion-air and draft faults
- Firing-rate and modulation problems
How it works
- Identify the machine from the nameplate or a photo of the control.
- Read the fault or alarm and look it up in the documentation for that model.
- Weigh the evidence you add (trends, logs, history) against each possible cause.
- Give you the ranked causes and the next check that separates them, with sources.
Questions
Which boilers does it cover?
Packaged steam and hot-water boilers with a burner management or flame safeguard control. Coverage starts with the most common controller families and grows from there.
Will it tell me how to reset a lockout?
It explains what the lockout means and what to check. Resetting, adjusting or bypassing safety controls must be done by qualified personnel following the manufacturer’s procedure.
What does it cost?
The diagnostic is free. Fleet Pulse and continuous monitoring are paid plans.
InduQT gives guidance, not instructions to operate equipment. Work on fuel, pressure and electrical systems must be done by qualified personnel following the manufacturer's procedures and local codes. Never bypass a safety device or interlock.